It's the new year and I'm back onto Hot Tip after the Christmas holiday madness. Have been sweating it out over Hot Tip for the past week on and off. Re-soldered wires that had fallen off and was hoping this would fix my problems.
The outhole coil is still not firing. Pressing the ball trough switch manually does nothing at all. I have reset all the stepper units manually at their starting positions, started a game by pressing the start button and the ball still does not kick out. I have pressed the outhole relay manually by hand and the drop targets reset, but nothing else happens. I have also pressed the tilt switch under the playfield manually by hand and it does nothing. I've checked all the solder connections on the outhole coil, the ball trough switch and the tilt switch by hand and can't see anything out of the ordinary here. I'm a bit lost at the moment. The bonus unit also seems to be moving freely and resets to zero when the start button is pressed if I movie it to other positions by hand.
Thanks,
Adam.
