One step forward and two steps back....just finished soldering the wire on the 10c relay and put the machine back together. Turned the power on and pressed start. No ball flung into the shooter lane ans no life from the flippers. I kept pressing the start button and once it kicked the ball into the shooter lane....then the flippers died again.

Back to square one...there's a glimmer of hope this time. The outhole solenoid is known to work. The next thing I'm focusing on are the stepper units. I've cleaned one of them, but at the moment, the coin unit and ball unit are not moving freely. I've found a good YouTube instructional video that shows me how they should be operating, so that's handy.

Cheers!
Adam.