First Job was the Ball Catcher Undertray,

Originally made out of Masonite had seen better days with a bit of warping and pieces broken off,

Cardboard stuck all over it..

So $15 worth of 6mm Marine Ply and a few hours Ive hopefully Fixed all The Ball Leaks,

You don't want to run out of Ammo @ 4 balls a Second

Ball lift Mech in the corner of the shots was removed deburred and cleaned,

Previous owner seemed to think Axle grease was good for this..oily balls

The Balls even found their way into the Cable sheathing,4th pic