Author Topic: Gottlieb Genie Restoration  (Read 21826 times)

0 Members and 1 Guest are viewing this topic.

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Gottlieb Genie Restoration
« on: March 12, 2014, 10:34:36 AM »

The restoration is basically split into two concurrent stages - the playfield restoration and the cabinet repaint.

The playfield stage requires a clear to "seal" the current artwork from further deterioration. There's no way I can do any repainting until I have a stable and flat playfield. The inserts are flattened and then installed back in the playfield. Then the first of several clears are applied. The pictures below are of the first coat of clear so that I can start work on repainting. I will do half the required touch ups and have it sealed again before finishing the touch ups and then finally the last applications of the clear. It is only a couple of pictures, but there is already a lot of hours to get to this point.







After 3 days, it is ready to rough up and commence the touch ups.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia