with regards to my post above, this was the first time I have soldered anything on the bottom of the playfield. Do you guys have any tips on how to do this easily? Given that the flippers are right up the top (when the playfield is raised vertically), I ended up using the short stand on the right hand side of the cabinet to prop the playfield up at approximately a 45degree angle. This way I could comfortably reach the area required while standing in front of the machine. I recall reading elsewhere that using this stand isn't really recommended as it puts stress on the playfield (as it sags diagonally under its own weight when on the stand).
What are your thoughts and/or tips?
I've found the best way to work on the underside of the playfield is to take it out of the game and turn it upside down .
