Jaycar didn't have the exact same fuse holder. It's the right rating however it doesn't physically fit through the hole in the line filter box so I've had to mount it temporarily until I can track down something more suitable as a permanent fix. I replaced the power cord at the same time and as well as being safer it looks a lot less ratty on the living room floor too.

Best thing to do is file the hole out to suit the new holder, it will be a standard size then, the old original fuse holders are really dodgy.

- I (nervously) desoldered the dodgy solder surrounding the pin and then applied fresh solder.
- Finally, I did one last continuity test across the pin and confirmed that it was all OK prior to re-installing the PCB in the machine, plugging it in and having a game with working lights.

You need to do all the pins, from the photo they all look dodgy