Headboard done!

One wet one dry.

Tried the dry method first, came out really well, no bubbles, just one small bump - forgot to clean the back of the decal (didn't follow Robs instructions  ). You need to go slow and precise, working from the middle outwards, but good results are certainly possible.

Just tried the wet, results, unfortunately got a small bubble, but having said that, it was my mistake and NOT the method. I found wet easier and far quicker, giving you time and allows for corrections to minor mistakes.

I cut back the backing paper and re-adhered. Set the decal in place with weights and clamp. Stuck one end down, but it was as I transitioned to pulling the remaining paper off I allowed the decal to catch before I sprayed the water and bugger me it was stuck. NEXT time spray water everywhere before you pull the paper back  . I reckon this should prevent the unintentional 'stick'

Trimmed with a medical scalpel and used a black permanent marker to colour the decal trimmed edges

Coin door maybe this afternoon, but will definitely be going 'wet'