Author Topic: solenoid board woes....help needed  (Read 6321 times)

0 Members and 11 Guests are viewing this topic.

Offline Boots

  • Trade Count: (+8)
  • ******
  • Forum Posts:
  • Adelaide
Re: solenoid board woes....help needed
« Reply #30 on: May 31, 2014, 11:31:28 PM »
Well, success!!
Turns out U2 was at fault all along, no locked on coils and they all fire perfectly. Thankyou all for your guidance so far.

The remaining issues are...
1. Lockout solenoid not working
2. No sound
3. Cant start a credit



The connector near the coin door may not be seated properly or is corroded

Check the connectors on the top of the MPU the header pins probably need re-soldering these often fail.

« Last Edit: May 31, 2014, 11:33:01 PM by Boots »