Author Topic: solenoid board woes....help needed  (Read 6315 times)

0 Members and 7 Guests are viewing this topic.

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: solenoid board woes....help needed
« Reply #30 on: June 01, 2014, 01:11:14 AM »
 
I would if you can, repair the boards in question and test in another machine.
if the problem still shows up in another machine then there are other problems on your board / boards.
if the boards work fine after you have repaired them in another machine then the fault is in the questioned machine.
process of elimination !!

On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)