"Meteor" and AC/DC Pro.. today not much wrong , But wait! Just a few switches not working , was the connector . one transistor replaced for a feature lamp , and adjusted a few switches , IE slingshot and a few target switches...
But F my Dog there is a hole burnt RIGHT through the solenoid board and wires coming from behind it to what looked like a automotive connector cover in insulation tape , Hackery 101. If i go back i will photo it .I cant believe it was still working , i didnt want to look behind the board to see , I did show the owner the problem ...
Also the usual wires all soldered on to the rectifier board connector pins and a few other small hacks , Game going again , but the game really did need some time spent fixing all the old "Fixes" that have been made in the past , It would need a full day to sort it all out i would say essp the solenoid Re-wiring and the connectors for the Rectifier Board ...
But game apart from all that , it was in good nic Playfield had full mylar all good plastics and looked mostly original, Aussie made game (LAI)
Still red in the Backglass and no crazing.
AC/DC pro, just a service , few lights etc , a few switch errors , fixed , and a clean up . Same house as the "Meteor" pinball...
