Ordered some of these boards ;
Horizontal 139 in 1
Vertical 412 in 1
Will be selling some of these with either board. We need to test them fully, but it appears both boards are reliable.
Both will plug straight in and work.
Be aware that, for the horizontal board, you will need to "remask" the glass and turn the monitor sideways.
Simple job to move the monitor as the pilot holes are already CNC'd into the mounting panel but the glass masking will require masking tape and a can of spray paint.
The bezel and its frame will be easy to swap to horizontal.
Usually, with horizontal boards, the monitor input plugs (signal and power) face towards the front of the machine, or down. Might help when you are relocating it.
