Author Topic: Topper not working on Police Force  (Read 2545 times)

0 Members and 3 Guests are viewing this topic.

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: Re:
« Reply #30 on: November 17, 2015, 12:42:03 PM »

No not all lower playfield
Is it the same amount of G.I out before you sent be the board or less?
If it's only 1 string out then it won't be the transistor for the G.I relay.
Try un pluging the connector I mentioned before
Same as before. As mentioned above. When I unplug J12 from ICB all lights come on
it was J12 on cpu / driver board but solenoid 10 (G.I. lower PF relay) goes through J12 on ICB so unfortunately you have blown the transistor
 
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)