Author Topic: embryon meltdown  (Read 1711 times)

0 Members and 4 Guests are viewing this topic.

Offline pinball god

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • Metallica is here to stay
Re: embryon meltdown
« on: December 28, 2015, 06:54:30 PM »
Take a step back and ensure the CPU board is ok.

Remove the connector (J1 from memory) from the rectifier board. Check the fuses on the power supply and then you should have a booting game without J1 connected. No solenoid power or GI lighting to the playfield.

you need to check the wiring to each lamp. Sounds like a a lamp matrix wire has shorted to a coil somewhere.
removed J1 which said playfield on the rectifier. Power on but knocker locked on. So powered off quickly.
Still loving my Metallica Premium