Thanks guy's much appreciated!

Now for my next Trick!... I re pinned all the connectors and now when I turn it on All the CPU controlled Solenoids lock on. I have checked over all the connectors and compared with my pics I took and all looks good. I am about to go over the connectors again but thought I would put it out there in case someone could point me in the right direction. The CPU board is faulty but operational. everything works but displays are garbled but was ok for testing with (well I thought). I will be replacing it with a Pascal board but just wanted to get everything working first.
Is this likely to be a connector issue or is it likely to be in a board?

Cheers: Brettski... :)