The KBS isn't thin enough and so any trapped air wont rise up through the coat and leave a smooth surface. My guess is that you used a roller?
Yep. Although for the 2nd coat i used a fine brush thingy call a shur line from bunnings. Not sure if this is better? Would you suggest brushing over rolling?
I have basic spray gear i use for painting the cabs, just not sure i have the confidence with clear and spraying! If i did, what size tip would you recommend?
Sent from my SM-G930F using Tapatalk
Rob, just my
Your workmanship is at a professional level. There are some aspects of High End Restos that you need to consider passing on to professionals. I arrived at this conclusion 4-5 years ago, that no matter if you are a home professional or in the industry, there are simply some things that no matter how hard to try, you can't achieve a playfield that will match the hard work around it.
I don't even blink at the idea of sending a playfield to HRP for restoration. No one in the industry is even in the same galaxy. I'm no expert, but that playfield needs have areas sanded back as the factory clear appears to have burn marks from the globes over time. You don't just clear over it. Your climate is unsuitable unless you have a booth.
The expense of having a playfield cleared is in stripping and re populating. You have done the hard work. There is this stigmata that playfield restorations cost millions of dollars. Trust me, you would be shocked at the price VS finished results.
I've been painting cabinets for 15 years, and I'm still learning, but playfield restoration on these playfields is something I've attempted in small doses, but I've always been concerned about 5 - 10 years from now. Will it hold up ?
Home restorers can use what they like when they like, but your games are right up there with the best. If you need a playfield box, I'll give you one. Shipping is dead easy.
