A little more progress made on the playfield over the last couple of days, despite the 40+ degree heat i had to deal with today!
Whites redone in the areas covered by the plastics;
Notice with the captive ball area in the center of the p'f (2nd and 4th pic) i chose to spray the entire area white (actually beige was the colour i used). This was done in order to give a nice even white base for the red and make it 'pop' more once it was airbrushed on.
Some filler work has also been done around the inserts that had wear back to the wood, Automotive primer/filler was used to build the surface up level again and sanded level ready for touchups.
