Message #200431

[Strangeways]

Here is the rebuilt Stepper Unit. New coil sleeves are also added and it steps up and resets perfectly.









Score Reel Assembles are always fun to rebuild. Rarely is one working perfectly, as they are almost always gummed up !



















I use a degreaser for the parts except the score reel itself. Then a trip to the ultrasonic which clean off all the "hard to get" grease and dirt. Rarely do I need to replace the springs, but the coil sleeve must be replaced. The score Reel should NEVER go into the ultrasonic. They should be cleaned with a mind water and Nifti solution. NEVER spray direct on them.







Clean and polish the Score Reel Housing.









Test Fit and solder the wires onto the coils.