Step 14 Thoroughly clean the Nylon Cog thingy and the cog section on the score reel as pointed out in the photo any dirt left on
here will cause friction and slow down the reel
Step 15 Replace the Spring over the shaft making sure the nylon washer is at the base of the shaft then then place the cog
Section over the shaft the trick here is to slightly pull the slide plate back enough to let the cog slide down the shaft
with the final tooth of the cog to be on the first tooth on the slide plate. (I hope this makes sense as i couldnt get a
good photo to much shine from the flash)
