Now for those who want to go the whole way continue here
STEP 8. Now to remove the guitar shaped things you need to remove the small C clip at the end of the rod when removing this
take the clip of the side that the guitars sit so when you pull the rod the bracket hold them in place if you go the other
way the guitars seize and make it hard to remove the rod. Also watch out for the return spring as the rod comes out
this may shoot off and as the rod falls out of the guitars simply unhook the lower spring
and remove the guitar thing.
STEP 9 Now the reset arm should just pull off the unit aswell
STEP 10 Now remove the 4 remaining screws holding the back plate on and that's it
