STEP 11.  Now this step really depends on the time and effort you want to spend on the unit.  I will usually just got the metho
                on a toothbrush then clean up with a dry rag but there is no reason you cant go all nino on it and hit the parts with a
                buff to make them really shine.

STEP 12.  Once you have cleaned up all the parts its time to put it back together. Screw the side plate with the switches
                attached to the top and bottom plate leaving the open slots facing out then slide the rod in like you removed it so the
                guitars hold against the bracket.  First sit the reset arm in place and slide the Nylon bush into place then start feeding
                in the rod put the return spring in place and slide the rod through that and feed it into the bracket.