Thanks a lot for posting this Bill .. I am about to remove/reseat all the inserts on my '68 WMS Lady Luck .. which will be my 1st attempt so I'm also interested in your experience with this job #*#gday dave, I removed all the iserts first of all.A couple chipped from the bottom ,but they didnt crack in half,so once they were all out, I proceeded with a little glue on each ,I started gluing 3 at a time,then i slotted the insert back in place, then gently tapped them level,that was basically it.I have photos that i have been trying to load for you guys but nothing happens.I have the old crappy dial-up. It was my first attempt....good luck with your williams lady luck!

Cheers
Dave