Author Topic: Gorgar 404 problem?  (Read 230 times)

0 Members and 2 Guests are viewing this topic.

Offline braddo

  • Trade Count: (0)
  • *****
  • Forum Posts:
Re: Gorgar 404 problem?
« on: October 19, 2009, 10:44:25 AM »
I'm getting sound effects, did not think to look at the score !@) but all solenoids on the machine aren't working either. Opened up the back box and there's one blown fuse in there.

To go a bit deeper (i did not mention this before cause i thought it may have been a separate problem), one of the drop targets was getting stuck, not dropping properly, and this caused the solenoid coil underneath to burn out, so i fixed the target (plastic casing in front of it was slightly bent at the end, jamming it). I'm waiting for a new coil, will replace the fuse and hopefully should be right from there, i think :D.

Thanks for the link Beaky ^^^, I've downloaded that manual but i don't think the whole thing is there. I'm only getting about 12 pages, just seems incomplete to me !@#.
« Last Edit: October 19, 2009, 10:46:57 AM by braddo »
WTB (or possibly trade) - 1980 Stern ALI