No need to speculate where the pin came from. The flipper was blowing fuses as the EOS wasnt adjusted properly and the high voltage when flipper button held in, was blowing the fuse. At least five test games were played once ajusted without fail and the strength of the flipper was adequate to make all ramp shots.
The coil, although not original tested fine,the coil sleeve is another issue that should be replaced. Pop by and let me know the parts you require.
Please mention that you played and tested both pins before picking up and that the mousin around was a last minute decision that I was rushed to get ready so that you could have for saturday.
You know you can always call me for assistance, forums are a great place to get advice, I hate when people always revert to........where did you get it from? as if something dodgy has taken place.
