CABINET RESTORATION;
I’ve been busy going back n forth between the Wildfyre PF and my Zac cab restore.. well I decided on starting on the backbox first. Naturally first thing to do was do the tracings of the stenciled designs on the backbox, so I can later redo them. I wont be able to use my usual white cardboard trick on this game as the stenciled designs taper off into really fine sharp points, so I’ll probably have to mask off the designs. Im still not 100% sure how im going to do this yet, I have a couple if ideas, but I’ll worry about that when the time comes.
Next thing I did was take it out to the garage and clean it up inside and out with Nifti and cloth, then I glued all of the lifting ply in preparation for paint stripping and filling all of the huge gouges and scrapes in the timber. The last pic shows the fillers im using to do this. The auto body filler for the large areas and the Polyfilla for the smaller dings and scrapes, and the Dulux enamel undercoat I used. Im using Dulux paints throughout the repaint.
