Author Topic: Converting US 110volt to Aus 240  (Read 432 times)

0 Members and 3 Guests are viewing this topic.

Offline johnwartjr

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Columbus, Indiana USA
  • It's ALIVEEEEEE!
    • My Home Gameroom . com
Re: Converting US 110volt to Aus 240
« on: January 31, 2010, 08:20:50 AM »
For WPC games after Popeye (not including Popeye)

There's a box inside the coin door to the right. Has a couple plugs in it, one of which comes out and has 12 pins in it.

For US 120v operation, the connector will have the following jumpers set

1-11
2-3
7-10
8-9



Pin 1 is the square pin in the upper right hand corner. It is numbered as follows

1234
5678
9101112

240 volt operation is as follows:

1-11
3-9
7-10

Make sure to change the line fuse from 5 amp to 4 amp.

Might want someone in Australia to confirm this, I'm just going based on my schematic manual and could be wrong!

The schematic manual I am using is at
http://www.pinrepair.com/wpc/wpc-95.pdf

See page 3