Author Topic: make sure you clean your sub ramp  (Read 1830 times)

0 Members and 2 Guests are viewing this topic.

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: make sure you clean your sub ramp
« on: February 17, 2010, 10:51:17 PM »
when i took it out i thought it was a smokey grey colour but it turned out to be clear

it had about 7 cracks in it so i drilled a 1mm hole at the end of the cracks (to stop the cracks progressing) then repaired it with some 5 min epoxy.

eventually it will be replaced but the epoxy will do until then
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)