After a month of dormancy with this project, i thought it was time for an update...
More coin door work... as i said before, some parts were missing from the coin door, including the 2nd coin switch actuator. 1st pic shows the donor mech, freshly ratted from the Superstar coindoor... nice n rusty!! And the 2nd pic shows the same mech after a soaking in Ranex rustbuster, and a bit of a sand with wet n dry and a polishing with Autosol.. much betterer me thinks!!
Last two pics show the coindoor wiring harness and the start of the re-wiring of the door. The wire for the 2nd coin switch was missing so it had to be replaced, i used wire from the Superstar playfield, also i replaced the wire for the 1st coin switch as well, using similar colours to the originals, as marked on the schematic.
while running the new wires, i discovered a cut off yellow(?) wire on the plug... i dont really know what this would've been for, as there is no mention of it on the schematic
Im thinking maybe it was for a coin lockout coil??
Can anyone reading this, who might have a Zac EM tell me if their game has a lockout coil?? Anyway i added a new wire to the harness... maybe i'll work it out later on.
