Next i rebuilt the flipper mechs. Once again, they were filled with WD40 or something and a mess!! so its a case of "2nd verse same as the first!" with cleaning etc. The 2nd and 3rd pics show the finished flipper mechs. The coils will be replaced later on.. i'm using Gtb coils to replace them, and the plungers and links were still ok so i didnt renew them.
and finally, a pic of the playfield so far... i started fitting the new rubbers this afternoon. I fired it up to check the bumpers and flippers, have to do some switch adjusting on the bumpers, and i still have to repair two of the drop targets which have the plastic faces broken off.. i have to find some yellow plastic to make new ones. Also i need to check and clean the lamp sockets.
shouldn't be too much longer now!!
