Finally got the plastics finished and installed tonight  

As i said before i had decided to re-do the whole lot, and scanning the old plastics and cleaning up the images took the most time! And yes i DID have a couple of stuff ups along the way and had to re-do things   but in the end the plan came together!

Anyhow here are a few pics.. the first couple of some of the reverse printed decals read to be applied to the 3mm polycarbonate plastic, and marking out one of the plastics to be cut on the scroll saw.  This is the right side plastic which had been broken at some point and reglued with a piece of tin and what looked like liquid nails or something similar.. theres that bastard barry the bodger again i just sheld it together with a piece of mylar so i could trace it out onto the polycarbonate.

And finally... VOILLA... the end result!! not too shabby i reckon. I ended up replacing some of the post mounting screws with 6-32 threaded ones from my old Superstar playfield ( the originals had no thread on the top and the nylon caps just pushed on to hold the plastics in place) and used brand new 6-32 acorn nuts bought from PSP   the top ones still have to be replaced as yet, they will bee soon as i find some more threaded post mountings.