Author Topic: Fitting a Metal Lift Trim  (Read 297 times)

0 Members and 7 Guests are viewing this topic.

Offline chris288

  • Trade Count: (+1)
  • *****
  • Forum Posts:
Re: Fitting a Metal Lift Trim
« on: June 25, 2010, 07:10:08 PM »

Have a look and see if there is any tape in the channel. There "should be". Heat up the outside with a hair dryer and slowly pull the channel away from the glass. You might find three pieces of self adhesive felt. It is really easy to heat up the adhesive.

I would probably be inclined to let the backglass warm up to normal temperature before putting heat on it with the hairdryer.

I have heard  of stories of BG's shattering just from the warmth of your fingers especially on these cold winter mornings.