Author Topic: Iron Monger issue  (Read 3374 times)

0 Members and 3 Guests are viewing this topic.

Offline Replicas

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • North West England
Re: Iron Monger issue
« on: August 09, 2010, 09:54:17 AM »
Hey Wonder
Tired of shooting the right ramp, your shot not being hard enough to reach the top and the ball draining?

Go to the post at the right of the ramp, remove the sleeve and replace with 3x 3/16 inch rubbers
The ball will bounce back to the left slingshot

I think I will eventually replace the post with a minipost or something similar so it looks factory issue

There are plenty of games that if you shoot the ramp but do not make it all the way and when the ball starts back down it drains S.D.T.M.
The most simple way to fix this is what I have done on most of mine, That is between the post and the post sleeve push in a tooth pick (cocktail stick) towards the side facing the ramp entrance. This just causes the ball to catch the sleeve on the way down thus stopping a drain S.D.T.M.

Don't think you will find a cheaper fix, and the best thing about it, you can't tell its been altered.
Darren.