And today after the white had been given time to cure, i rubbed it back lightly with 400 grit wet&dry and windex, to level it out a bit and to remove the rough edges.
Then... once again i had to mask it off for the fluoro orange, this time masking off so as to allow a bit of overlap onto the black key lines, which can be sanded lightly with 1200 grit later when im ready to do the black lines.
Pics show the progress... last pic is where im at with it at the moment
Once again, this colour is fairly transparent like the pink was.. it can be seen where i masked off. I wasnt too worried about accuracy when cutting out here, as it will be well and truly hidden once its sanded smooth and the black is redone
