I got a few more touchups done today despite the shitty cold weather here, Armidale really is the arse end of the universe i reckon!!

Anyway, armed with heaters to warm the garage and a 150 watt floodlight shining onto the pf to warm the pf surface, seems to work well.
The sections of dark green had a few spots of paint loss, in the form of white dots which needed to be filled. I ended up using a green permanent marker to touch these spots up..

Pics show the results. This area shown wasnt all that bad really, i had tried on another worse section first but didnt get any pics 
This worked better that expected, just dabbing the marker onto the dots, then wiping off the excess ink with a cloth dampened with Prepsol. I know it seems like a bit of a dodgey way to do this repair, but it worked well after a few wipes with the cloth and Prepsol and wont be easy to spot when the PF is finished.

I'll give it a bit of a polish up later on, it looks a bit dull at the moment becaused i gave it a light sand with 1200 grit wet&dry before touchup was done.

The pf will be mylar covered just as all my pf restores.