Also i now have the top arch and wooden guide rails all repainted!!
I had to get the colour custom mixed, i took the top arch into the paint shop where my bandmate works and got him to match the colour for me, and put it into spray cans, i got two cans of the colour mixed, he got the colour match pretty damn good
Its acrylic paint as i usually use on PFs and aprons etc.
I just got the top arch finished just a couple of hours ago.. stripped it back to bare metal, wiped it over with Prepsol and hit it with some etch primer, let it dry and rubbed it back with 400 grit wet&dry and water, then wiped it down with Prepsol again before spraying a about 3 coats of the colour.
I'll let these items cure for a day or so before i refit them to the PF, will post more pics when done!
With two cans of this colour mixed, plus a touchup can of the leftover colour that was given to me as well, i ended up with leftover paint, which, being an exact match for the colour on my Klondike pin BG, i'll use that paint to do some 'much needed' repairs to my Klondike backglass
