Good luck with This Beaky have a sound board for one of these aswell it's been a real bitch. Working 100% on the bench get it inonthe game and the bitch locks up but the replacement board works fine. Hahaha
I'm pretty sure I have the test Rom still in the board I'll check it out when I get home tomorrow.
thanks mate, if the file i downloaded is not the correct one i will let you know.
When my mate bought the disco fever the board was working but it died on him. no one has touched the board since he has had the DF but some one before has replaced some of the electrolytic caps and resoldered all the +5 and Gnd pins on all the I.C's so I assume it has had problems before yet none of the I.C's have been desoldered. After looking at the large cap on the board it look like it has been replaced with a second hand one so before doing any thing else I will replace all the caps on the board.
I have suggested to my mate that he should let me refurbish the power supply as some one has replaced some of the caps with several second hand ones.
the large filter cap on the power supply has been replaced with 3 or 4 different value second hand caps to make up the correct value of one cap.
bloody amatures, I mean why bother using second hand caps when a set of new correct value caps would be under $30
