And tonight i fitted the pf! but on powering it up with the pf hooked up, all the GI lamps were dim and the GI fuse blew a few seconds later, meaning i had a shorted GI socket on the pf   so after about 10 or 15 minutes of swearing at it   and searching i found the culprit.. i had messed up with one of my jumper wires connecting the centre pin of one of the sockets, and accidentally hooked it to the ground  side of the socket Anyhoo after correcting that little stuffup it powered up again nice n bright  

Still have a few things to do before its finished, i need to repin the lamp driver connectors for the pf lamps as some of them are a bit dodgey, and im waiting on the new flipper buttons to arrive i have ordered, and clean and straighten the plastics.. Plus i want to do some more work on the backglass, and tidy it up some more, will post pics and info of that when i get around to it  

but its getting close now!!