Ok,
Many Many thanks to Nino, I now have the schematics for this machine but I am still struggling i'm afraid.
I have re-assembled Jungle queen and have two faults remaining when the machine is started which I am struggling to sort.
When the front bumper skirt is triggered, the front coil locks on. When the switch contacts are opened, the coil remains locked on.
When either the left or right rear bumper skirts are triggered, both rear bumper coils lock on.
I cannot see why this is happening.
I have not removed any wires from the coils or taken switches out or apart. Must be something upstream but relying on the switch as the initial trigger.
Cosing the contacts on the lower switches does not activate scores either but not sure if this is normal without solenoids installed?
The other problem which may or may not be connected is that on start up the first outer chime box coil locks on also. At this point I have taken the wire off it to sort the coils.
All the other switcheds and solenoids appear to work, backbox, lighting etc.
Any ideas from the Gurus?
J.D.
