Post 2

I started by drilling a 1.5mm hole through the back of the creature and tied in fishing line through the hole and locked around both armpits to help stabilise him once he is tied in place.

I then disconnected both the motors as they don't work anyway and then I snipped the wires from the lamp in the back of the cabinet and removed the lamp holder to clean and relocate.

I then purchased $2 of wire from Jaycar and connected the wire to the snipped light source wires. I then routed these 2 cables from the original light source up to the hologram location.

photos below are of the fishing line and the lamp holder to be relocated.