Backbox now finished, I hope.....
Gave all the boards a soak in the bath and dried out, they were all pretty good to start with.
All male header pins have been replaced on the boards, all female plugs have been done as well and wiring looms cleaned, all but the main power plugs which looked to be in good nick. Replaced all the electro caps and rebuilt the 100v supply with kits from GPE. I installed IC sockets to the Driver board PIA chips and got some new PIA's from Ken, replaced the two bridge rectifiers with new ones and installed fuses to the AC side of these as per the Pinrepair guides.
Remote mounted the battery pack and stole the TX cover from Gorgar as this one was missing, I will try to find one or make a new one down the track.
