Ok - back to topic.  A small update:

*  The freshly painted light board with cleaned wiring and scoring led displays has been installed.  I only painted the front side and just cleaned the rear side with Nifty as I really did not want to strip the piano wiring and other stuff etc.

*  All looms cleaned and various plugs installed back to the lamp and sound boards

*  The freshly serviced and overhauled rectifier board, MPU and solenoid boards (done by Beaky) are in the mail

*  I have pulled apart the coin door and am working through cleaning all those parts - I am just looking for a 20c coin mech at present as it only has 1 x SBA in there at present.  I've taken a tonne of pics and am also relying on Nino's pics of his coin door from his restore.  I am hoping I do not stuff this up

*  The next step after all that will be stripping the playfield and replacing coils, flipper assemblies and heaps of playfield parts that I bought from the US.  I will also be putting in LEDS that I purchased from Cointaker in the US

More pics will be uploaded tomorrow hopefully