Thanks Strangeways.
Jango, I have a couple of relay covers for you to try on that relay on the solenoid / power sup board. I will post them to you when I send you the other housings and pins.
The relay covers were donated to me by a member of this forum '48' (Lindsay) so a big thank you goes to Lindsay for those
Also a big thank you goes to Homepin (Mike) for all the 2.54mm header pins, 470pf axil caps (which are imposable to get any where) and the resistor upgrades used on the mpu board
All the I.C. sockets where replaced on the mpu board and I also removed and replaced a lot of components because of the corrosion.
I also repaired the nasty burn on the driver board among a huge list of other things.
When I get some free time I will do a post on the repairs and upgrades for these boards.
