Thanks to Nino I'm back to where I started with the left hand GI's out and I don't have the right slight flasher working. I have done the following:

Checked the flasher bulb and ok
Checked the violet wires from the start of the string under the pf and at the plug to continuity and ok
Check for continuity between the white/violet and violet pins on the pcb and ok

BUT I touched other pins and got a beep ie. White/violet and white/green I get continuity. Pins 1,2,6 to 11 all beep together. I'm guessing this is not good or are they common in some way?

Also I get 0v at the first bulb where violet and white/violet attach

Please help if you can as I'm going to wait before pulling the board out again

Thanks