« previous next »
Pages: [1]   Go Down

Author Topic: Testing faulty 4 slot opto board stern (WPT)  (Read 295 times)

0 Members and 1 Guest are viewing this topic.

Offline SRB

  • Trade Count: (0)
  • *
  • Forum Posts:
Testing faulty 4 slot opto board stern (WPT)
« on: June 24, 2013, 10:18:59 PM »
Hi Guys,

i am new to the pinball game and this forum, im teaching myself to fix my own pinball probs so any info would be great. i have an issue with an opto board with 4 opto switches on it. one switch is always on. i cleaned it but to no avail. i have tested the little SMD resistors and diodes. but one of the resistors that is part of the problem switch is giving me a different reading. it is a 33 ohm SMD but is giving me a reading of 31. could that be enough of a difference to be faulty? or should i just replace the switch? or how could i test if the switch is faulty?

cheers
scott



Logged

Offline Homepin

  • Trade Count: (+15)
  • ******
  • Forum Posts:
  • Not a business - A Passion!
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #1 on: June 24, 2013, 10:42:53 PM »
Welcome to AP

A 33R resistor can read anywhere from 20R to 50R and make little to no difference in that circuit.

It is likely the opto is faulty BUT - the best way to test by far is to measure the voltages on the device when it is operating.

Tell us exactly what the board is and you might get a better answer.
Logged
Replacement Pinball PCBs that remain faithful to the originals

Offline SRB

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #2 on: June 30, 2013, 01:52:16 PM »
Yeah it looks like a faulty opto. I used my phone camera to view the opto led and the suspected optos light was not working.  I have ordered one on the net.

Cheers
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #3 on: June 30, 2013, 04:19:24 PM »
So the front camera worked Scott?  Bloody iPhone 4 lol
Logged

Offline SRB

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #4 on: June 30, 2013, 07:38:47 PM »
Haha yes the front camera worked like a charm. Are you the bumper tech that gave me that great tip?

I also tested the transistor responsible for the light column and it seems faulty also so just waiting on a solder sucker and I'll have a go replacing it.
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #5 on: June 30, 2013, 09:05:58 PM »
Yep that would be me.  Glad the tip paid off.  Fair chance it's just the opto.   If you omen a Dremel I'd use that to remove them Rivets if you slip with a drill it will be all over
Logged

Offline SRB

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #6 on: June 30, 2013, 10:33:30 PM »
Yeah good idea, I think a mate has one I'll use that. Again thanks for your help the other day.
Logged

Offline SRB

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #7 on: July 09, 2013, 11:42:39 PM »
Just an update guys. Replaced the opto and replaced a suspected faulty transistor for a lamp column. Now I'm back in business, the machine is working perfectly.

Cheers
Logged

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Geelong
Re: Testing faulty 4 slot opto board stern (WPT)
« Reply #8 on: July 09, 2013, 11:47:23 PM »
Quote from: SRB on July 09, 2013, 11:42:39 PM
Just an update guys. Replaced the opto and replaced a suspected faulty transistor for a lamp column. Now I'm back in business, the machine is working perfectly.

Cheers

Nice work
Logged
Pages: [1]   Go Up
« previous next »