« previous next »
Pages: [1]   Go Down

Author Topic: Wiring for mods  (Read 5309 times)

0 Members and 1 Guest are viewing this topic.

Offline delarge

  • Trade Count: (+2)
  • ******
  • Forum Posts:
    • Wagg Wagga, NSW
Wiring for mods
« on: September 21, 2014, 08:00:21 PM »
Hi all,
I started my own LCD screen mod for my AC/DC Pro last year and had a Raspberry Pi connected playing video on loop. I'd just about completed my working prototype and then the project stalled. I've now decided I should finish what I started. Could someone please point me in the right direction on which grade wire to use or a Web address? I have the connectors ready to go, just need to extend the wiring from up the back of the playfield to the power source.

Cheers!
Adam.
Logged

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Lake Macquarie, NSW
Re: Wiring for mods
« Reply #1 on: September 21, 2014, 08:05:27 PM »
what is the power you need to the mod and amps
Logged
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline delarge

  • Trade Count: (+2)
  • ******
  • Forum Posts:
    • Wagg Wagga, NSW
Re: Wiring for mods
« Reply #2 on: September 25, 2014, 03:39:16 PM »
Hey Jady,
Raspberry Pi is 5.25V 2A. LCD screen is 12V.

Cheers!
Adam.
Logged

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Lake Macquarie, NSW
Re: Wiring for mods
« Reply #3 on: September 25, 2014, 08:50:57 PM »
18 gauge or metric similar 19 x 0.193mm.

My leads for the creature mod are the metric option and will easily take the 12 volt.
Logged
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline delarge

  • Trade Count: (+2)
  • ******
  • Forum Posts:
    • Wagg Wagga, NSW
Re: Wiring for mods
« Reply #4 on: September 25, 2014, 08:52:28 PM »
Thanks, Jady. Will pull my finger out and get this happening now.

Cheers!
Adam.
Logged
Pages: [1]   Go Up
« previous next »