Hi all,
I'm testing the coil resistance on my Haunted House before I power it up, as per the recommendation in Clay's guide.
On the main playfield, I'm getting 1.6 ohms on all 4 flipper coils. When I disconnect the ground wire from one of the main playfield flippers, I get 2.9 ohms, which is about right according to the chart in the manual, so it seems like the coils are good.
However, is it normal for the main playfield flippers to have this lower resistance (1.6 ohms) when they are in the circuit? I ask because Clay's guide says all the coils should read above 2.4 ohms.
Can anyone with a Haunted House please put the leads of their multimeter on the outside lugs of one of your main playfield flipper coils and read the resistance for me? You can probably do it through the coin door, don't even need to lift the playfield.
Thanks
