Author Topic: Fuse 104 keeps blowing  (Read 3876 times)

0 Members and 1 Guest are viewing this topic.

Offline pig warts

  • Trade Count: (0)
  • *
  • Forum Posts:
Fuse 104 keeps blowing
« on: May 23, 2020, 07:20:22 PM »
Fuse 104 keeps blowing on my Totan when ball passes through the fireball magnet in play mode.
In test mode all is good no blowing fuses.
Any help appreciated.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Fuse 104 keeps blowing
« Reply #1 on: May 23, 2020, 07:24:32 PM »
I’d say your magnet is just about stuffed in test mode it’s only pulsed,  when it grabs the ball it latches in for longer to grab the ball


Sent from my iPhone using Tapatalk

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Fuse 104 keeps blowing
« Reply #2 on: May 23, 2020, 08:20:12 PM »
Do you have the correct fuse value and type ?
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline pig warts

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Fuse 104 keeps blowing
« Reply #3 on: May 24, 2020, 08:06:03 PM »
Fuse been used is a 4amp FB which is the one specified.
Swapped the vanishing magnet (which works fine) with the fireball magnet but still blows the fuse.






Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Fuse 104 keeps blowing
« Reply #4 on: May 24, 2020, 11:32:45 PM »
Interesting,     Maybe check the fuse holder has enough tension on the fuse ?
 
   Give the metal tabs a bit of a squeeze in then re insert the fuse?


Sent from my iPhone using Tapatalk

Offline rads

  • Trade Count: (+1)
  • *****
  • Forum Posts:
Re: Fuse 104 keeps blowing
« Reply #5 on: May 26, 2020, 09:52:41 PM »
What brand of fuse are you using. I had a fuse blowing on a tom when a magnet was activated.  I was using a cheap fuse. Changed to a buss fuse and the problem went away

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Fuse 104 keeps blowing
« Reply #6 on: May 28, 2020, 05:28:10 PM »
Also check the IDC connector from the Driver board. Make sure the wires on the connector have not become loose. If you don't have an IDC insertion tool, use a flat head screwdriver.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline pig warts

  • Trade Count: (0)
  • *
  • Forum Posts:
Re: Fuse 104 keeps blowing
« Reply #7 on: June 10, 2020, 06:58:43 PM »
What brand of fuse are you using. I had a fuse blowing on a tom when a magnet was activated.  I was using a cheap fuse. Changed to a buss fuse and the problem went away
Pretty sure they're a cheap fuse from jaycar.
Where can I get a Bussmann fuse from?

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Fuse 104 keeps blowing
« Reply #8 on: June 12, 2020, 11:44:14 AM »
What brand of fuse are you using. I had a fuse blowing on a tom when a magnet was activated.  I was using a cheap fuse. Changed to a buss fuse and the problem went away
Pretty sure they're a cheap fuse from jaycar.
Where can I get a Bussmann fuse from?

We have a wide range of Fuses ;

https://www.rtbb.com.au/product/mdl-1-1-4-slow-blow-fuses/
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline punkin

  • Trade Count: (0)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Woolgoolga NSW
Re: Fuse 104 keeps blowing
« Reply #9 on: June 12, 2020, 12:05:44 PM »
Do you do a kit for people like me new to it mate? I'd like to buy a kit in a tackle tray with say ten of each common size.
Bought a little one from somewhere but they are not the slo-blow.
Looking for Bally Space Invaders, Stern Orbitor 1

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Fuse 104 keeps blowing
« Reply #10 on: June 12, 2020, 04:01:30 PM »
Do you do a kit for people like me new to it mate? I'd like to buy a kit in a tackle tray with say ten of each common size.
Bought a little one from somewhere but they are not the slo-blow.

Not in Bussmann / Littlefuse as they are provided in boxes of 5. We could look at this in the future, as the Bussmann fuses are slowly being made available in larger quantities without packaging.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia