Metal Guide rail needed

[Wotto]

Hey all,

Wondering if anyone might have one of these spare lying around?
It has to be 44mm ( 1' 12/16 inch ) from hole to hole.

Cheers if you can help.

[Pinfan]

Hey Wotto,

I have have successfully used bike spokes in the past... All depends on thickness !

You could make one for the current time until you find one..

[MrMaloo]

Hey Wotto,

I have have successfully used bike spokes in the past... All depends on thickness !

You could make one for the current time until you find one..

I was thinking the same thing . If you could source some stainless steel wire that is the same thickness and make up a little jig to bend it on so it stays nice and straight .

[AskJacob]

Head off to a hobby shop - they have "piano wire" in many diameters. It is tough stuff to bend, a vice and a mallet is the minimum equipment to get it to obey!

Cheers
Jacob

[ddstoys]

Ill take a look on some of my playfields might be lucky.   I once seen a coathanger used damn it was funny they didnt even cut it of they just bent the rest into a bunch under the playfield

[ddstoys]

Your in luck Wotto  PM me your address and ill send it to you.  Has a slight bend but im sure you will manage

[Pinfan]

Oh man..... Daniel comes through again !      

[Wotto]

Thankyou everyone - thanks Daniel - PM sent - awesome 

[Marty Machine]

I have a few boxes of gottlieb wires i pulled out, all sizes.....

Happy to send one up if u need.

[ddstoys]

Hey Wotto its in the mail