« previous next »
Pages: [1]   Go Down

Author Topic: Baywatch pin problem  (Read 195 times)

0 Members and 2 Guests are viewing this topic.

Offline pinfrog

  • Trade Count: (0)
  • ****
  • Forum Posts:
    • Perth WA
Baywatch pin problem
« on: March 02, 2011, 01:37:02 PM »
Hi, I need some expert advice! After launching a ball into play, the up kicker solenoid that puts the ball into play fires another 4 or 5 times as if it is looking to fire out another ball. All 5 balls are in place and have checked the switches the balls sit on are working. What else should I be looking for ?. Hope this makes sense!.
  Cheers.
Logged

Offline pinnies4me

  • Administrator
  • Trade Count: (+5)
  • *****
  • High Score Initials:
  • Forum Posts:
    • Victoria
Re: Baywatch pin problem
« Reply #1 on: March 02, 2011, 03:57:56 PM »
Not familiar with Sega, but if the trough switches are not optos, first thing to check is to ensure that while the switches might work in test, they are sensing a ball - finger pressure might be registering, but ball position might not be enough to trigger. Can sometimes be as simple as bending a switch arm.
Logged
“If you wanna escape, go up to a pinball machine. There’s a magic button on the front that takes you to a world under the glass and makes the the rest of the universe disappear.”

Offline Steevsee

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
    • Brisbane
Re: Baywatch pin problem
« Reply #2 on: March 02, 2011, 05:36:09 PM »
My baywatch does the exact same thing pretty regularly.
Cleaning the optos will usually fix it up, otherwise you may need to reflow the solder on the connectors of the opto boards.
« Last Edit: March 02, 2011, 06:57:15 PM by Steevsee »
Logged
Pages: [1]   Go Up
« previous next »