DMD Stand Off plugs - What type are these?

[mamejay]

Hey guys wondering if you can help.
I have 3 snapped DMD standoff on my Party Zone.
I have been trying to find the correct ones to buy but can't seem to find them.
In the pictures you can see the DMD where they are snapped and a close up of one of them. Remember that there is still a piece of the stand off in the backboard.
I tried to get it out but it look like it has been glued in or something like that.

I measured it up as best i could. If anyone knows the exact one I should use that would be great. I really though these would be easy to find.
if anyone knows exactly where to get these it would be greatly appreciated

[benpin]

Have you tried

Jaycar,

Altronics

 for the standoff you are chasing?

Good luck

[Pinballer]

 dont have the exact thing you need, but they do have alternatives....

http://www.rockby.com.au/searchres_11.cfm?imageField.x=0&imageField.y=0&searchkey=pcb+screw

http://www.rockby.com.au/catresults.cfm?imageField2.x=0&imageField2.y=0&stock_no=28166

http://www.rockby.com.au/catresults.cfm?imageField2.x=0&imageField2.y=0&stock_no=34472

http://www.rockby.com.au/catresults.cfm?imageField2.x=0&imageField2.y=0&stock_no=28479

http://www.rockby.com.au/searchres_11.cfm?imageField.x=0&imageField.y=0&searchkey=spacer&offset=1

[mamejay]

Thanks for the advise guys.

Its strange that I cannot find these on any pinball spares site.  I would like to get the actual replacements and not do trial and error.
It can get a little expensive especially when you start talking about going to Jaycar to grab parts.
I will keep hunting along and hope I find the actual ones.
Thanks