wanted: A-15946 bridge driver pcb & A-16733 interrupter / bushing for WMS IJ

[beaky]

I am chasing a A-15946 bridge driver pcb

& a A-16733 interrupter / bushing assy

for a WMS Indiana Jones.

These are for the mini playfield.

I have tried marco's and mad amusements but no one has them in stock.

these are missing from a machine i am currently servicing.

If i can't find a bridge driver pcb then  will have to make one.
Thanks

[Caveoftreasures]

Andy, have you tried
* PBR
* or ask Mark if he has a wreck
* ask Tony Pinball shed if he has a wreck
* Rob from Bikecity
* ask Nino for any leads
Email Marcos/Bay Area/Mad Amusements/Classic Arcades/PBR/RTBB etc cause not every part is listed on all these sites and someone may have/or know of a Indianna Wrecked playfield. I will ask Martyn and see IF he still has a wrecked playfield for Indianna.  I reckon Jump on the phone n ring around.

Did any other machine use this board etc, like other widebodies like Twilight Zone etc ? Maybe look sideways at other builds. OR JUST MAKE ONE ! 

[Homepin]

I can make that board using more easily available parts - you could test it then I could add it to my range of re=created boards.

The main problem with pin sellers being out of stock of a lot of things these days is that heaps of the parts used have become obsolete. In the case of this PCB the bridge driver IC is hard to find and EXPENSIVE when you do. I would use a very similar part but from new production.

Let me know Andrew.

[Strangeways]

Google is your friend. The interrupter / bushing is available at a few places. Mad amusements have the board listed as "out of stock" - but you could contact them to see when they are receiving stock ?

I'd take up mike's offer on the board as it will benefit other techs and add another product to Mike's awesome range !

[Homepin]

I have decided to make this board. All I need is the 4 mounting hole sizes and the exact distance between them so that the new board will screw straight in.

Can anyone help with these dimensions please?

(sorry about the thread hi-jack Andrew)

[morrie]

Send the duke of pinball a email (mike)
I know he had a couple of populated path of adventure playfields for sale

[beaky]

thanks guys

I will take you up on the offer Mike if i cant find one.

If no one can give you the measurements on the holes i will take the measurements when I am re installing the boards I have to do repairs on mid week.

[Homepin]

thanks guys

I will take you up on the offer Mike if i cant find one.

If no one can give you the measurements on the holes i will take the measurements when I am re installing the boards I have to do repairs on mid week.

Got the measurements (but I'll put them at the end and I would appreciate confirmation of them) and I am on the job. Parts are ordered and on the way - proto layout started. Proto board in your hands in ABOUT 2 weeks.

More details soon.

Board dimensions:

A = 78mm
B = 58mm
C = 66mm
D = 46mm

hole diameter : 5.5mm

[Boots]

Have you found the A-16733 interrupter / bushing assy yet?

[Homepin]

Have you found the A-16733 interrupter / bushing assy yet?

I reckon you could make that part dead easy. If it were my machine I would.

[Boots]

Have you found the A-16733 interrupter / bushing assy yet?

I reckon you could make that part dead easy. If it were my machine I would.

+1

[beaky]

Have you found the A-16733 interrupter / bushing assy yet?

I reckon you could make that part dead easy. If it were my machine I would.

haven't found one yet, if I can't then that's what will have to be done.

This is going in a machine for a customer.

There is also a problem with the optos that the interrupter interrupts 
I have replacement optos but when these optos are interrupted one triggers the " I " in indy and the other does nothing. I have also triggered them manually using a diode with the opto board removed  and the same thing is happening.

looks like some one tried to fix it but couldn't figure it out, the mini playfield wasn't even seated on the motor spindle properly and the grub screw was loose.
 

[Private Gimp]

Hey Homepin,
Are you making, or have you made the A-15946 Bridge Driver Assembly as yet mate?

Just wondering, I have one breaking down when hot. Not sure were to start fault finding, IC for sure seeing its heat related but if HP has a new one Iam going that way for sure!!

Regards everyone.
Cliff Tucker

[Homepin]

Hey Homepin,
Are you making, or have you made the A-15946 Bridge Driver Assembly as yet mate?

Just wondering, I have one breaking down when hot. Not sure were to start fault finding, IC for sure seeing its heat related but if HP has a new one Iam going that way for sure!!

Regards everyone.
Cliff Tucker

Right here and in stock:

http://www.homepin.com/poa.html